Established in 2002 at Ghaziabad, 25 km east of Delhi to serve the electronic/electrical industry in the field of PTFE (Teflon) Insulated Wires & Cables and PTFE (Teflon®) Sleeves/Tubings and other parts.  In a short period of few months, there is a wide acceptance of our products in the international market, and the demand is growing exponentially.

PRODUCTS

PTFE Sleeves/Tubings and PTFE Insulated Wires and Cables for modern, miniature, high-performance and high-temperature electronic and electrical equipments, classified as 

• Sleeves/Tubings per USA MIL-I-22129 or Indian JSS 54802; Also highly flexible PTFE/PFA Dual-wall tubings for semi-medical (low-pressure, low-diffusion, gas flow devices)
• Equipment wires per USA MIL-W-16878, British BS 2G-210 or Indian JSS 51034
• RF Coaxial/Triaxial, Flexible or Semi-Rigid, and Low-Noise Cables per USA MIL-C-17 or Indian JSS 51100; Also Low-Loss Cables using expanded PTFE Dielectric
• High Voltage Corona Resistant(HVCR) Wires & cables
• Flat (Bonded or Woven) and Round Multi-core Cables
• Heating Wires & Cables – Insulated and Metal Braided/Sheathed
• Delay Lines; Low Capacitance Cables; Semi-Air-Spaced Cables

• Quality  - Exceeding MIL-specs; 100% tested and inspected
• Range  - Hundreds of items and sizes
• Sleeves: ID 0.25-16.0 mm, Wall thickness 0.25-0.5 mm, or specials; also in cut pieces
• Wires: AWG 34/7/42 to AWG 4/133/25; SPC/NPC/SPHSCA; Type ET, E, EE 
• High Voltage wires & cables: Upto 22 KV AC/50 KV DC, plain or shielded/jacketed 
• Coaxial Cables: Miniature 1.8 mm to 11 mm OD; 50, 75, 95 ohms, or specials
• Multi-core cables: 2 to 31 cores/pairs/triads, SPC/NPC/SS shield and jacket
  
• Recent developments in High-End Audio cables - Interconnects, Power Cords and Speaker Cables
  
• Cut-stripped lengths, connector fitted assemblies
• Capacity - Annual US $ 0.5 million, Peak US $ 2000 or 30 km per day
• Dun & Bradstreet D-U-N-S ® Number: 65-045-7208
  

R&D Design Team * Integrated Conductor Facility * Versatile, Superior Tape-Wrapping-Sintering Process * Economy in Small Runs*Prompt, Low-Cost Desk-Delivery of Small Orders

PEOPLE

CEO: Dr. Mukul M Mittal, Ph.D. (U.S.A.) 1984 -- having over 30 years of experience in design, development and manufacture of PTFE (Teflon) Insulated Wires & Cables, and PTFE sleeves/Tubings.

ASSOCIATE COMPANIES

Sangam Electronics Industries (Plated, Stranded conductors)

SPC/NPC : Silver/Nickel Plated Copper, SPHSCA : Silver Plated High Strength Copper Alloy, 
SS: Stainless Steel, Type ET/E/EE: PTFE Insulation for 250/600/1000 V AC RMS working